Potentiostatic Pages

The standard potentiostatic analysis contains the following pages at startup:

Chart page
The heart of the Potentiostatic analysis. It contains the data plotted as current versus time.

Experimental Setup page
A list of the parameters used to acquire the data presented on the Chart page.

Experimental Notes The notes entered by the user before data-acquisition. You can edit the Notes in the analysis, and saved with the changes to an analysis data file.

Open Circuit Voltage page Displays a chart of OCP vs time that was collected during the Initial Delay.

Hardware Settings Page All of the potentiostat settings used during the experimental run.

NOTE: THESE PAGES DO NOT APPEAR AT START-UP:

This page contains a grid of integration values based on different sections in visible traces from the most recent use of the Integrate command.

This page contains a grid of minimum and maximum values of each visible trace based on the most recent use of the Min/Max command.