ChronoA.StopAt()

Type: INSTANCE FUNCTION

Purpose: Enable or disable the + termination limits.

There are two limiting conditions upon which a curve may prematurely terminate:

1. Under

• I < Limit

2. Over

• I > Limit

The Over criterion is used to limit a positive current swing. The Under criterion limits a negative current swing.

These conditions may be individually enabled and disabled.

Usage:

ChronoA.StopAt(Under, Over)

Under

• REAL
  • Enable the Under test and set value.
• NIL
  • Disable the Under test

Over

• REAL
  • Enable the Over test and set value
• NIL
  • Disable the Over test