Signal.SetAcquisitionControl()

Type: INSTANCE FUNCTION

This instance function is available for all signals.

AcqMode	INDEX	Type of acquisition mode: 0 = Fast Mode 1 = DSP Mode
	or
	NIL	Use the default AcqMode. This mode is set based on the output point sample period: Below 100.0 µs the system uses Fast Mode. At or above 100.0 µs, the system uses DSP Mode.
AcquBasePeriod	REAL	The time between each sample point. This number should not be less than the default of 16.666 µs.
	or
	NIL	Use the default AcqBasePeriod. For ACQ_MODE_FAST, this is not used. For ACQ_MODE_DSP, the default is 16.666 µs.
SampleRate	REAL	The output point rate, in seconds. Output points are the points displayed to the user and saved to the curve. They are made up of one or more sample points.
	or
	NIL	Use the default sample rate specified in the SIGNAL.New call.
DutyCycle	REAL	A number between from 0.0 to 1.0 specifying the duty cycle that is used in sampling. 0.0 always gives one sample, while 1.0 samples as quickly as possible.
	or
	INDEX	0 = One sample only (duty cycle of 0.0) 1 = Use the default duty cycle of 0.20 2 = Use a duty cycle of 1.0
	or
	NIL	Use the default duty cycle of 0.20