Galvanostatic Pages

The standard Galvanostatic analysis contains the following pages at startup:

Chart

• The Chart page is the heart of the Differential Pulse analysis. It contains the data plotted as Idifference versus Vforward.

Experimental Setup

• The Experimental Setup page contains a list of the parameters used to acquire the data presented on the Chart page.

Experimental Notes

• The Experimental Notes are the notes you entered prior to the data-acquisition. The Notes can be edited in the analysis, and saved with the changes to an analysis data file.

Hardware Settings

• The Hardware Settings page contains all of the potentiostat settings used during the run of the experiment.

Electrode Settings

• The Electrode Settings page contains all of the electrode settings used during the run of the experiment. This page specifies if the experiment was a stripping experiment.

Additional Pages Which May Become Visible

Min/Max

• This page contains a grid of minimum and maximum values of each visible trace based on the most recent use of the Min/Max command.

Peak Locations

• This page contains a grid of peak locations and magnitudes based on the most recent use of the Peak Find command.