|
<< Click to Display Table of Contents >> Navigation: Explain™ Control Language > Library Routines > Curve classes > class GALVCOR > Galvcor.StopAtDelay() |
Used to avoid premature stopping of a curve because of noise creating a false reading for a StopAt test.
Requires StopAt criterion be met for a number of data points (N) before the curve stops. The parameter N can be individually set for each StopAt test.
For absolute tests, such as E > Limit, the criterion must be met for N points consecutively before the criterion is accepted. One point missing the criterion limit resets the N point counter.
For slope tests, such as dE/dt < Limit, the slope is evaluated over N points.
Galvcor.StopAtDelay(Under, Over, Stable, Runaway, Decreasing, Increasing)
Under |
REAL |
Delay for this number of points. |
NIL |
Only one point required. |
|
Over |
REAL |
Delay for this number of points. |
NIL |
Only one point required. |
|
Stable |
REAL |
Delay for this number of points. |
NIL |
Only one point required. |
|
Runaway |
REAL |
Delay for this number of points. |
NIL |
Only one point required. |
|
Decreasing |
REAL |
Delay for this number of points. |
NIL |
Only one point required. |
|
Increasing |
REAL |
Delay for this number of points. |
NIL |
Only one point required. |