Description
Set the IE range.
You can either set an absolute current range or set current range to a range large enough to measure a given current.
Not all ranges are available on specific potentiostats. Please consult your potentiostat operator’s manual for information specific to your potentiostat.
|
The ranges listed below are for 300 mA or 30 mA models. For 750 mA models, multiply the ranges by 2.5. For 600 mA models, multiply the ranges by 2.0.
|
Type
INSTANCE FUNCTION
Usage
RangeSet = Pstat.SetIERange(Range)
Range
|
INDEX
|
Absolute current range (Full-scale limit):
•0 = 3 pA
•1 = 30 pA
•2 = 300 pA
•3 = 3 nA
•4 = 30 nA
•5 = 300 nA
•6 = 3 µA
•7 = 30 µA
•8 = 300 µA
•9 = 3 mA
•10 = 30 mA
•11 = 300 mA
•12 = 3 A
•13 = 30 A
•14 = 300 A
•15 = 3 kA
If you attempt to set a range which is not available for a specific potentiostat, a Parameter Error is issued.
|
REAL
|
Current to be measured. Function picks the best range.
If you attempt to set the range to measure a current greater than Imax for a specific potentiostat, a Parameter Error is issued.
|
RangeSet
|
INDEX
|
The new current-range setting.
|