Pstat.SetSenseSpeedMode() Type: INSTANCE FUNCTION Purpose: Sets the Sense Speed auto-set mode. NOTE: PCI4 Femtostat ONLY Usage: Pstat.SetSenseSpeed(State) State TRUE Sense Speed automatically selected based on current… read more →
Pstat.SetSignal() Type: INSTANCE FUNCTION Purpose: Specify which signal is to be used by the potentostat. Multiple signals can be pre-created, and then used one at a time by making a… read more →
Pstat.SetStability() Type: INSTANCE FUNCTION Purpose: Set the I/E converter stability for potentiostat mode. There are four settings for stability: Fast (0) MediumFast (1) Medium or Normal (2) Slow (3) with… read more →
Pstat.SetThermoSelect() Type: INSTANCE FUNCTION Purpose: Specifies the type of value to be reported when the Auxiliary channel on the control board is set to measure the thermocouple. Usage: ThermoSelectSet =… read more →
Pstat.SetVchFilter() Type: INSTANCE FUNCTION Purpose: Pstat.SetVchFilter() sets the filter on the voltage-measuring channel. This filter has no effect on potentiostat stability. If the parameter passed by SetVchFilter() is a frequency… read more →
Pstat.SetLEDS() Type: INSTANCE FUNCTION Purpose: Set the on/off state of the LEDs on a PCI4 family potentiostat. NOTE: This function is for PCI4 family potentiostats only! Individual LEDs can be set,… read more →
Pstat.SetPosFeedEnable() Type: INSTANCE FUNCTION Purpose: Set, then enable state of the Positive Feedback DAC. Positive feedback is enabled when performing positive-feedback IR-compensation. Also make a call to SetPosFeedResistance to set… read more →
Pstat.SetPosFeedResistance() Type: INSTANCE FUNCTION Purpose: Sets the uncompensated resistance value used during positive feedback. Positive feedback is enabled when performing positive-feedback IR-compensation. Enable the positive feedback mode before making this… read more →
Pstat.SetScan() Type: INSTANCE FUNCTION Purpose: Set scan voltage. This signal is first summed with the Scan, DDS signal, and External signal. It is then sent to the potentiostat’s signal input.… read more →
Pstat.SetIERangeMode() Type: INSTANCE FUNCTION Purpose: Enable or disable current-measurement autoranging. If autoranging is enabled (on), after each current measurement is made, the current range is adjusted before the next point… read more →