Ciiv.StopAt()

Type: INSTANCE FUNCTION

Purpose: Enable or disable the Ciiv termination limits.

There are six limiting conditions upon which a curve may prematurely terminate:

1. Under

E < Limit

2. Over

E > Limit

3. Stable abs(dE/dt) < Limit 4. Runaway abs(dE/dt) > Limit 5. Decreasing dE/dt < Limit 6. Increasing dE/dt > Limit

The Over criterion is used to limit a positive voltage swing. The Under criterion limits a negative voltage swing. The Runaway criterion limits the rate of change in potential. The Stable criterion is used to run a sample until it shows stable behavior. The Decreasing and Increasing conditions are signed versions of the Stable and Runaway criteria.

These conditions may be individually enabled and disabled.

Usage:

Ciiv.StopAt(Under, Over, Stable, Runaway, Decreasing, Increasing) Under REAL

Enable the Under test and set value.

NIL Disable the Under test Over REAL Enable the Over test and set value NIL Disable the Over test Stable REAL Enable the Stable test and set value NIL Disable the Stable test Runaway REAL Enable the Runaway test and set value NIL Disable the Runaway test Decreasing REAL Enable the Decreasing test and set value NIL Disable the Decreasing test Increasing REAL Enable the Increasing test and set value NIL Disable the Increasing test