Galvcor.Printl()

Type: INSTANCE FUNCTION

Purpose: Print the results of a Galvcor experiment out to the Output file.

The Output record is printed in the format:

Tag <tab> “TABLE” <tab> Points<tab> “Pt” <tab> “T” <tab> “Vf” <tab> “Im” <tab> “Sig” <tab> “Vu” <tab> “Ach” <tab> “Over”<tab> “#” <tab> “s” <tab> “V” <tab> “A” <tab> “V” <tab> “V” <tab> “V” <tab> “bits”<tab> Pt1 <tab> T <tab> V <tab> I <tab> V <tab> V <tab> V <tab> Flags<tab> Pt2 <tab> T <tab> V <tab> I <tab> V <tab> V <tab> V <tab> Flags…<tab> PtN <tab> T <tab> V <tab> I <tab> V <tab> V <tab> V <tab> Flags

where the symbols have the following meanings:

  Tag The curve Tag [from Galvcor.New() or optional argument]   Points Total number of points acquired.   Pt(#) Sequential number of a point.   T Elapsed time from starting from Galvcor.Run.   Vf Measured Voltage vs Eref.   Im Measured cell current.   Vu Applied E vs. Ecounter (usually 0).   Sig Signal sent to Control Amplifier.   Ach Aux Channel voltage.   Over Overload flags.

The Vf value is the voltage difference maintained between the counter and working electrodes. In a traditional Galvanic Corrosion experiment this is 0.000 volts. The Vu value is the voltage difference measured between the reference and working electrodes.

Optional. Used to print a different Tag than the one used in the call to GALVCOR.New().

Related Topics