Pstat.SetAchSelect()
Pstat.SetAchSelect()
Type: INSTANCE FUNCTION
Purpose: Pstat.SetAchSelect specifies the input to be measured by the Auxiliary channel on the control board.
The default setting is the BNC input on the control board
Usage: AchSelectSet = Pstat.SetAchSelect (Input)
| Input | INDEX |
Input to select 0 = BNC connector (Default) 1 = Pstat (Not used currently) 2 = Control Amplifier on potentiostat 3 = Thermocouple 4 = Ground |
|
| AchSelectSet | INDEX | The new input selected |
This is valid for PC5 instruments.
Related Topics
Comments are closed.