Pstat.SetVchOffsetEnable()

Type: INSTANCE FUNCTION

Purpose: Enable or Disable post-potentiostat offset correction.

This allows the DC component of a measured voltage signal to be removed. Removal of this DC component allows multiplication of the signal by a post-gain factor (1×, 10×, 100×) while keeping this post-gain signal within the voltage limit of the analog-to-digital converter (ADC).

Usage: Result = Pstat.SetVchOffsetEnable(State)

State

BOOL

TRUE = Enabled

FALSE = Disabled

Result

BOOL

Returns State as Set.

This is valid for PC5 instruments.