Most of the parameters for Multiplexed EFM Trend are common to all Electrochemical Frequency Modulation experiments, and they are already covered under those experiments’ Help topics. The real difference between… read more →
Definitions of Key Words The following key terms are used throughout this help section. Active Cell The cell (if any) currently connected to the system potentiostat. Any electrochemical measurements are… read more →
Run the Electrochemical Frequency Modulation standard technique by selecting Experiment>Electrochemical Frequency Modulation>Electrochemical Frequency Modulation from the Framework™ menu bar. This initiates the following sequence of events: Framework creates a runner… read more →
Here is a typical dialog box for a ZRA Mode ECN experiment.All of the Setup parameters for the ZRA Mode ECN test have been discussed in the Common Setup Parameters.
Electrochemical Noise Measurements in ZRA mode make simultaneous measurements of both current and voltage noise. Two identical corrosion specimens are held at the same potential and the current flow between… read more →
Run this test by selecting Experiment>Electrochemical Noise>ZRA Mode Electrochemical Noise from the Framework™ menu bar. This initiates the following sequence of events: Framework creates a runner window, and the ZRA… read more →
Here is the dialog box for the Potentiostatic Mode ECN Test. All of the Setup parameters for the potentiostatic Mode ECN test except Applied Voltage are described in the Common… read more →
An Electrochemical Noise test in potentiostatic mode measures current noise at a fixed electrode-potential. A corrosion specimen is immersed in a solution and its potential (versus a reference electrode) is… read more →
Run this test by selecting Experiment>Electrochemical Noise>Potentiostatic Mode Electrochemical Noise from the Framework™ menu bar. This initiates the following sequence of events: Framework creates a runner window, and the Potentiostatic… read more →