The Transform Axes dialog box allows you to make some changes to the style of the current chart axes. Voltages In the Voltages area, you specify whether voltages should be… read more →
If AE data were collected during an experiment, this command plots the data curves for those data. When multiple channels of AE data are selected, each channel can be plotted… read more →
By default, the Echem Analyst™ uses positive signs for current, power, and energy in charge, and negative signs for the corresponding values in discharge. The Sign Options command overrides the… read more →
The Smooth Data command is used in cases where the acquired data is less than ideal. There are some cases where exterior noise enters the cell and causes the data… read more →
The Set Current Plot As Default command allows you to save the current settings of a plot as the default. When this is done, all files of the same type… read more →
The Restore System Default Plot command clears any settings that were previously saved via the Set Current Plot As Default command. After you select this command, the chart is refreshed… read more →
For many types of Electrochemical Energy data files, the Gamry Echem Analyst™ automatically calculates a percent capacity column and adds it to the data table. This column is calculated using… read more →
The Quick Integrate command is used to integrate the current to achieve a total charge value. This command requires that an x-region be selected. The command operates on all visible… read more →
When running a cyclic charge-discharge experiment, you have the option to save raw data. When you choose this option, additional data files for each charge and discharge step are saved.… read more →
The Min/Max command is used to find the minimum and maximum values of the data plotted on the y-axis. This command requires that you select an x-region. If you do… read more →