Run the Multiplexed Galvanodynamic standard technique by selecting Experiment> Multiplexed DC Corrosion >Multiplexed Galvanodynamic from the Framework™ menu bar. This initiates the following sequence of events: The Framework creates a… read more →
This experiment allows you to measure galvanodynamic electrochemical polarization curves for up to eight samples automatically. The samples are connected to the Framework™ system via an ECM8 Electrochemical Multiplexer. Each… read more →
The runtime control consist of four buttons and a Curve List pull-down control. The four control buttons are familiar to any user of the non-multiplexed DC Corrosion experiments, although in… read more →
Here is the Multiplexed Galvanodynamic Setup dialog box complete with its default parameters. Pstat, Multiplexer Choose the PStat and Multiplexer using the labeled radio buttons. Choose only one device of… read more →
Run the Multiplexed Potentiodynamic standard technique by selecting Experiment> Multiplexed DC Corrosion> Multiplexed Potentiodynamic from the Framework™ menu bar. This initiates the following sequence of events: The Framework creates a… read more →
This experiment allows you to measure galvanic corrosion versus time on up to eight samples sequentially. The Galvanic Corrosion technique is used to study the electrochemical reactions that occur when… read more →
Multiplexed Corrosion Potential is an experiment within the Gamry Framework™ Multiplexed Corrosion group of tests. Multiplexed Corrosion Potential is used to track changes in the open-circuit potential of multiple corrosion… read more →
Here is the Multiplexed Corrosion Potential Setup dialog box complete with its default parameters. Pstat, Multiplexer Select your Pstat and Multiplexer using the labeled radio buttons. You may select only… read more →
Run the Multiplexed Cyclic Polarization standard technique by selecting Experiment>Multiplexed DC Corrosion>Multiplexed Cyclic Polarization from the Framework™ menu bar. This initiates the following sequence of events: 1. The Framework creates… read more →
This experiment allows you to measure electrochemical polarization curves for up to eight samples automatically. The samples are connected to the Framework™ system via an ECM8 Electrochemical Multiplexer. Each sample… read more →