Electrochemical Frequency Modulation

• EFM Trend Commands The following selections appear under the EFM Trend Menu. Min/Max The minimum and maximum values for the y-axis of the… ...
• EFM Commands The following choices appear under the EFM Menu: Calculate as Active Selecting this menu choice causes the Corrosion Current, Corrosion… ...
• Multiplexed EFM Trend Analysis The Multiplexed EFM Trend experiment produces an EFM Trend data file for each active channel. Each of these data files… ...
• EFM Trend Analysis The data file from an Electrochemical Frequency Modulation Trend experiment is normally analyzed by the Electrochemical Frequency Modulation Trend.Gscript data… ...
• EFM Analysis Loading an Electrochemical Frequency Modulation data file loads the script Electrochemical Frequency Modulation.GScript, which generates the following tabs: EFM Chart… ...
• EFM Analysis Overview The Electrochemical Frequency Modulation software uses the Gamry Echem Analyst™ to display, analyze, and print acquired data files. The Gamry… ...
• Overview of EFM Techniques This section describes the standard EFM measurement techniques that are included with the EFM software. Each technique description includes: A… ...
• Multiplexed EFM Trend Setup Parameters Most of the parameters for Multiplexed EFM Trend are common to all Electrochemical Frequency Modulation experiments, and they are already… ...
• Multiplexed EFM Trend Purpose This experiment allows you to follow changes (for up to eight samples) in the corrosion rate versus time. A Gamry… ...
• Multiplexed EFM Trend Experimental Setup Run the Multiplexed EFM Trend technique by selecting Experiment>Electrochemical Frequency Modulation>Multiplexed EFM Trend from the Framework™ menu bar. This initiates… ...