Multiplexer Configure and Test is available in version 7.06 (and later) of Gamry Instruments’ software suite. It encapsulates several older ECM8 utility functions into one utility that includes on-screen instructions… read more →
The Aux Electrometer Calibration is only available for Reference™ 3000s with the AE Option installed or Reference™ 3000 with AE booster with a Reference™ 30+ k Booster. It corrects for… read more →
Introduction Calibrate Cable Capacitance is used to measure correction values for EIS cable-capacitance correction. The correction eliminates EIS discontinuities caused by variations in cable-to-cable capacitance. The variation in capacitance occurs… read more →
Select Experiment >Utilities >Calibrate Instrument on the Framework menu. You see a dialog box similar to this: This Framework system has two Gamry potentiostats connected: a Reference™ 600+ and an… read more →
Compliance Voltage is used to change the maximum voltage output of a Reference™ 3000 potentiostat. Compliance voltage is the maximum voltage that can be applied between the counter electrode and… read more →
What does a Discontinuity Look Like? Spectra collected using Gamry Instruments’ EIS scripts will occasionally show discontinuities. They are small, abrupt deviations in impedance phase and magnitude in the spectrum.… read more →
Low I DC Calibration fixes a subtle problem in Gamry’s normal calibration procedure. The cause is complex but the following attempts to describe the problem in simple terms. All voltage-measurement… read more →
Calibrate Instrument is used to measure and correct for drifts in potentiostat circuitry. Gamry Instruments’ potentiostats are precision instruments not subject to large drifts. However, occasional recalibration by a user… read more →