Description
To calibrate the Thermocouple on the Reference family instruments, or the RTD probe on the Interface family, please follow these steps:
1. In Framework, go to Experiment > Utilities > Calibrate Temperature Measurements.
2. A menu will appear asking you to select the instrument you want to calibrate.
3. The calibration routine will then guide you on calibration. These steps will differ depending on if you are calibrating a thermocouple or an RTD probe.
4. Once finished a box will appear confirming whether the calibration was successful or not.
|
If errors appear in your calibration, Gamry’s technical support or local representative. |
