|
<< Click to Display Table of Contents >> Navigation: Experiments > D - Multiplexed DC Corrosion > Techniques > Multiplexed Galvanodynamic > Multiplexed Galvanodynamic - Experimental Sequence |
Run the Multiplexed Galvanodynamic standard technique by selecting Experiment > Multiplexed DC Corrosion > Multiplexed Galvanodynamic from the Framework™ menu bar. This initiates the following sequence of events:
1.Framework™ creates a Runner window, and the Multiplexed Galvanodynamic.exp script is run in this window.
2.The script creates the Setup dialog box and accepts changes in the experimental parameters. This dialog box allows you to specify the channels to be run, information concerning each channel, and global information about the entire experiment on all channels.
3.The script opens the electrochemical parameters file (SYSTEM.SET) and recovers the electrochemical system characteristics (βs, density , Equiv. Wt.) for each active cell from the file. If the script cannot open the file or find the System Name, the script warns you and then returns you to the Setup dialog box.
4.The script now opens the data file associated with each active Multiplexer channel to see if there are any problems with the composite (base plus channel number) file name.
5.The script obtains the use of the potentiostat and Multiplexer specified in the script or in the Setup dialog box. It initializes the Multiplexer so that all the cells are in the off state specified in the script. If the potentiostat or Multiplexer are in use or the file cannot be opened, the script returns you to the Setup dialog box. The file header information is written to the data file. This information is written to the file prior to data acquisition. If the experiment is aborted, the file contains only this information. This header information includes:
•Tags identifying possible analyses.
•The current time and date.
•A list of the Setup parameters.
6.The script now switches the Multiplexer to the first (next) selected channel.
7.It then runs a complete Galvanodynamic experiment on this cell. Electrode Conditioning is performed if requested. An Initial Delay is performed if requested. In all cases, Eoc is measured prior to the scan.
8.Finally, the actual scan occurs. The current of the sample is swept from the Initial I to the Final I. Voltage readings at fixed time intervals are taken during the sweep. Once the scan is over, the cell is turned off and the Multiplexer channel is turned off.
9.Steps 6 to 8 are now repeated for every other active channel.